C&N Spotless installs professional window film on cars, homes and businesses, at your driveway, office or job site anywhere in Broward County, from Fort Lauderdale to Weston. Cleaner glass, cooler interiors, and a finish that looks factory.
We bring the tools, film and setup to your location.
Professional-grade film chosen for your glass and goals.
Film cuts UV exposure and helps keep interiors cooler.
Tight edges, no lift, no debris. Glass left spotless.
Whether it's a daily driver, a front room that bakes in the afternoon or a storefront full of glass, the process is the same: the right film, cut and installed properly, cleaned up behind us, at your address anywhere in Broward County.
01 / Automotive
Cars, trucks and SUVs. Full vehicles or single windows, cut and fitted to your glass, including rear windshields and quarter glass. We'll walk you through shade options and what's legal where you drive.
Automotive tint details
02 / Residential
Homes, condos and sunrooms. Cut glare on screens, take the edge off hot rooms and add daytime privacy without blacking the place out.
Residential tint details
03 / Commercial
Offices, storefronts and fleet vehicles. Scheduled around your hours so the work happens without shutting anything down.
Commercial tint detailsA visor band across the top of the windshield to knock down low sun. Sized to keep you within local limits.
Windshield strip detailsHigher-spec films reject more infrared heat. We'll show you the actual specs before you pick one.
How film cuts heat and glareDarker shades for rear glass, home-facing windows and anything you'd rather not have on display.
Privacy tint options
Drag the handle to compare two shades on the same glass. Shade rendering is a simulation shown over a real C&N install. Actual appearance varies with the glass, the film and the light.
VLT is how much visible light a film lets through. A higher number is lighter. Tap a shade to load it on the right-hand side of the preview.
Florida law: front side windows must let in at least 28% of light; rear side and back windows at least 15% on cars, or 6% on SUVs, trucks and vans. The windshield can only take a non-reflective strip above the AS-1 line. We'll keep your shade legal.
Real vehicles, shot on location. Tap any image to open it full size.
Most tint jobs mean dropping your car off and losing a day. We work mobile (automotive, residential and commercial), so the job happens where you already are, and you get your glass back the same visit.
Home, office or job site: we arrive set up and ready to work, not looking for an outlet.
Film is cut to the glass and worked tight to the edges. No lifted corners, no trapped debris, no light gaps.
Automotive glass, a west-facing living room and a storefront don't want the same film. We pick for the surface.
Glass cleaned, trim wiped, scraps out. The name isn't decorative.
You'll know the shade, the film and the price before we start, including what's legal where you drive.
01
Send your vehicle or the windows you want done, plus your location. We come back with a shade recommendation and a price.
02
We go through shade levels, heat rejection and what your local law allows, then lock in a time that works for you.
03
We arrive, prep and install at your location, clean up behind us and walk you through the cure time before we go.
Fresh film can look slightly hazy or show small water pockets for the first few days. That's moisture drying out behind the film, and it clears on its own. Leave the windows up for 3 to 5 days and skip the car wash until it's settled.
Read the aftercare FAQWe'd rather show nothing than make something up. Verified reviews from recent jobs land here as they come in.
First review slot, reserved for a real customer.
Recently had us out? Your review goes here.
Third slot, ready when the words are.
There's no shop to visit. C&N Spotless is a mobile service: we bring the film, tools and setup to your home, workplace, driveway or job site anywhere in Broward County, Florida, and tint your car, home or business right there.
Check My AreaMobile service only. We come to you, so there's no storefront to visit.
(954) 213-7808Send a photo of your vehicle or windows and we'll tell you what we'd recommend, no obligation.
Ask Us DirectlyA full vehicle usually runs about 2 to 4 hours depending on the number of windows, the glass shape and whether old film has to come off first. Removing failed tint adds time. Homes and commercial jobs are quoted by the number and size of the windows.
Professional-grade film typically lasts many years without bubbling or turning purple. Cheap film is what fails early. Actual lifespan depends on the film you choose and the manufacturer's warranty that comes with it. We'll tell you exactly what's on your glass and what it's covered for before we install.
Shades are described by VLT (visible light transmission). Common options run 70%, 50%, 35%, 20% and 5%, where a lower number is darker. 35% is the most popular front-window choice; 20% and 5% are usually rear glass. Use the shade preview above to compare them side by side.
Yes, though how much depends entirely on the film rather than how dark it looks. Ceramic and infrared-rejecting films block significantly more heat than standard dyed film at the same shade. We'll show you the manufacturer's heat-rejection specs for whatever film you're considering so you're comparing real numbers.
Quality window films are rated to block up to 99% of UV rays, including clear films that barely change how the glass looks. That's what protects your interior from fading and cracking, and your skin on long drives or in a sunny room.
Under Florida law, front side windows must let at least 28% of light through. On sedans and coupes, the rear side windows and back window must let at least 15% through; on SUVs, trucks and vans those rear windows can go as dark as 6%. The windshield can only have a non-reflective strip above the AS-1 line marked on the glass, and film can't be too mirror-like (no more than 25% reflective on the front sides, 35% on the rear). Drivers with certain medical conditions can apply to the Florida DHSMV for an exemption. We'll recommend the darkest legal option for your vehicle, or tell you plainly if what you're asking for isn't legal. Limits can change, so we confirm the current rules for your vehicle before we install.
Leave the windows up for 3 to 5 days while the film cures, and don't panic if it looks hazy or shows small water pockets at first. That's normal and clears as the moisture dries out. After it's cured, clean with an ammonia-free cleaner and a soft microfiber cloth. Ammonia-based cleaners break film down over time.
Always. Send your vehicle year, make and model (or the windows you want done and roughly how many) and we'll come back with a shade recommendation and a price. Nothing is booked until you say so.
All of Broward County, Florida, including Fort Lauderdale, Plantation, Davie, Sunrise, Weston, Pembroke Pines, Miramar, Hollywood, Coral Springs, Pompano Beach, Coconut Creek, Tamarac, Margate, Lauderhill, Cooper City, Parkland and Deerfield Beach. We come to your home, office or job site, so there's no shop to drive to.
That's the whole model. We're a mobile service. We come to your home, office or job site with everything needed to do the work properly on-site. We do need a reasonably clean, sheltered spot to work in, since wind and dust are the enemy of a clean install. We'll confirm the details when you book.
Fill this out and we'll come back with a shade recommendation and a price. If it's easier, call or text instead.
Tell us the vehicle or the windows and where you are. We'll bring the shop to you.
